THAI O.P.P. PUBLIC COMPANY LIMITEDSET: TOPP🇹🇭 TH

Business Operation · 2025

Corporate Information

Company Name

THAI O.P.P. PUBLIC COMPANY LIMITED

Telephone

0-2678-1051-5, 0-2285-4940

Website

www.topp.co.th

Email

mail@topp.co.th

Dividend Policy

Dividend Policy

The Company has established a dividend policy to distribute dividends to shareholders at a rate of not less than 30 percent of net profit after statutory reserve. The actual dividend payment shall depend on the Company’s investment plans, financial position, liquidity, operating performance, and other relevant factors, as deemed appropriate by the Board of Directors.

The Board of Directors may, from time to time, consider the payment of interim dividends to shareholders, provided that the Company has sufficient retained earnings and maintains an appropriate financial position. Any such interim dividend payments will be reported to shareholders at the next Annual General Meeting of Shareholders.

Historical Dividend Payments

This YearLast Year2 Years Ago3 Years Ago4 Years AgoMetricDescription
14.7116.3422.2412.7213.46Net profit per share (Baht : Share)Net profit per share (baht : share)
4.424.916.683.824.05Dividend per share (Baht : Share)Dividend per share (baht : share)
00000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
00000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
4.424.916.683.824.05Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
30.0530.0530.0430.0230.09Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)

Major Shareholders

Major Shareholders

No.NameShares% Shares
26,659Pol.Cap. Sumet Limatibul883,26314.72
26,839Mr. Suthee Limatibul879,53514.66
26,840Mr. Chavalit Limatibul837,68313.96
26,841MR. Chalermchai Mahagitsiri723,90012.07
26,842Mr. Boonchai Limatibul267,5104.46
26,843Ms. Chantana Limatibul253,7104.23
26,844Ms. Theerarat Limatibul207,7103.46
26,846Mr. Boonchu Limatibul185,2113.09
26,847Mrs. Chariya Limatibul177,7102.96
26,848Mr. Prayudh Mahagitsiri150,5002.51

Business Strategies Overview

Chairman's Message

In 2025, the economic environment across Asia continued to experience gradual growth, supported by domestic consumption and the recovery of the services sector. However, the overall business landscape remained challenging. Persistently high interest rates, volatility in energy and raw material prices, and ongoing uncertainties in geopolitics and global trade policies continued to exert pressure on the industrial sector. As a result, businesses were required to operate with greater prudence in cost management and operational efficiency, while the packaging industry remained highly competitive, particularly in terms of pricing.

Amid these challenges, the Company reported total revenue of Baht 1,704.9 million, representing a slight decrease of 0.7 percent from the previous year. Net profit for the year amounted to Baht 112.3 million, reflecting an increase of 1.3 percent, primarily supported by a higher share of profit from investments in associates. For core operations, the Company recorded operating profit before share of profit from investments, finance costs, and income tax of Baht 112.7 million, a decrease of 2.9 percent from the previous year. This was mainly attributable to competitive market conditions and cost levels that remained elevated relative to production volume.

The Company continues to operate through its three core business segments, each adapting in alignment with prevailing market conditions. The Film business has maintained its focus on enhancing production efficiency and operational stability. The Labels and Stickers business delivered revenue growth and continued to serve as a key driver supporting the Company’s overall performance. Meanwhile, the Tube Packaging business maintained a stable level of revenue comparable to the previous year. Across all segments, the Company remains committed to improving operational efficiency, enhancing machine stability, and adopting advanced technologies for quality control, with the objective of strengthening long-term competitiveness.

At the same time, the Company has continued to advance product development in line with sustainability trends. Key initiatives include the development of recyclable packaging solutions, the reduction of raw material usage, and the design of environmentally friendly products. These efforts reflect the Company’s commitment to responding to evolving customer expectations and global sustainability directions.

The Company operates under an ESG framework, emphasizing efficient resource utilization, reduction of environmental impact, employee capability development, and adherence to good corporate governance principles. In parallel, the Company continues to strengthen relationships with customers and business partners, enabling the pursuit of new opportunities and supporting long-term, sustainable growth.

On behalf of the Board of Directors, I would like to express our sincere appreciation to our shareholders, customers, business partners, employees, and all stakeholders for their continued trust and support. The Board remains committed to providing prudent oversight and strategic direction, guiding the Company toward stable and sustainable growth, while delivering long-term value to all stakeholders.

Vision

To be a leading integrated packaging company, committed to delivering innovative, high-quality products and services, creating sustainable value for all stakeholders, and driving long-term business growth.

Objectives

The Company is committed to strengthening its competitiveness, achieving sustainable growth, and creating long-term value for all stakeholders. The Company operates in accordance with high standards of business practices, aligned with international standards and sustainable development principles.

Goals

The Company has established key business goals to support sustainable growth, focusing on the following priorities:

  • To achieve continuous growth in revenue and profitability through increasing the proportion of value-added products.

  • To enhance production and management efficiency in order to optimize costs and strengthen competitiveness.

  • To maintain and continuously improve product quality in line with international standards and evolving customer requirements.

  • To strengthen customer satisfaction and foster long-term business relationships.

  • To develop employee capabilities and cultivate a strong and adaptive organizational culture.

  • To conduct business in accordance with sustainability principles by reducing environmental impact and promoting efficient resource utilization.

  • To reinforce good corporate governance practices and strengthen stakeholder confidence.

Mission

The Company’s mission is to:

  • Deliver innovative and high-quality products and services that respond to customer needs and sustainability trends.

  • Enhance operational performance through the effective application of technology and efficient processes.

  • Continuously develop employee capabilities to support long-term organizational growth.

  • Generate appropriate returns for shareholders while creating value for all stakeholders.

  • Conduct business with integrity, transparency, and a strong commitment to social and environmental responsibility.

Business Strategies

To achieve its vision and strategic objectives, the Company has established the following key business strategies:

  1. Expansion of Value-Added Products
    Enhance the proportion of value-added products by developing innovative solutions that address specific customer requirements and align with evolving market trends.

  2. Operational Excellence
    Improve production efficiency through process optimization, waste reduction, enhanced machine stability, and effective cost management.

  3. Technology and Innovation Development
    Leverage advanced technologies and digital systems to improve operational efficiency, accuracy, and product quality.

  4. Strengthening Customer Partnerships
    Build long-term strategic relationships with customers through collaboration, technical support, and value-driven solutions to enhance satisfaction and engagement.

  5. Human Capital and Organizational Development
    Promote continuous learning and capability development to strengthen employee performance and support sustainable business growth.

  6. Sustainability-Driven Operations
    Integrate sustainability principles into business operations by developing environmentally friendly products, improving resource efficiency, and reducing environmental impact.

  7. Corporate Governance and Risk Management
    Uphold high standards of corporate governance and implement robust risk management practices to ensure transparency, accountability, and long-term business resilience

Material Changes & Developments

Material Changes & Developments

YearDescription
2,023
  • The company purchased film extrusion machines, equipment, and tools for film extrusion from L.A. Plaspack Co., Ltd., totaling 42.61 million Baht, to increase production capacity and enhance production management efficiency, and to serve as a backup in case of emergencies.

  • The company increased its capital in the joint venture L.S. Pack Co., Ltd. in the Socialist Republic of Vietnam to invest in purchasing machinery to increase production capacity and to maintain the minimum registered capital to asset value ratio as per Vietnamese law. The company still holds the same 25% shareholding, amounting to 12.48 million Baht.

  • The company increased its capital in the joint venture PT. Kimpai Dyna Tube in the Republic of Indonesia to pay for the second capital increase in registered capital, for investment in purchasing machinery to increase production capacity, amounting to 13.20 million Baht.

  • The company paid dividends from its operating results for the year ended December 31, 2022, at a rate of 3.82 Baht per share, totaling 22.92 million Baht in cash dividends on May 26, 2023.

  • The company commenced the installation of new film extrusion machines ordered in 2022, which are expected to undergo operational testing and commence production within the first quarter of 2024.

2,024
  • The company installed an additional 350 kWp solar cell system at Wellgrow Industrial Estate to reduce the use of external energy for film blowing machines.

  • The company paid dividends from its operating results for the year ended December 31, 2023, at a rate of 6.68 Baht per share, totaling 40.08 million Baht in cash dividends on May 29, 2024.

  • The company's research and development team developed a group of printing film layers and planned to test biodegradable films to respond to the

    consumer demand that prioritizes the environment. The products help reduce the amount of plastic waste remaining in ecosystems and reflect the company's commitment to supporting sustainable packaging practices.

2,025

January

  • The Company’s Research and Development (R&D) team developed innovative packaging solutions in collaboration with customers, enabling film products to be easily opened and resealed. This development enhances user convenience and aligns with evolving consumer behavior.

May

  • The Company’s R&D team developed barrier film products to meet customer requirements for enhanced product protection in the packaging sector, while also improving production efficiency.

August

  • The Company installed additional Automatic Inspection Systems in the film production process to enhance quality control accuracy and strengthen production standards over the long term.

December

  • The Company received the renewal of its certification from the Thai Private Sector Collective Action Against Corruption (CAC) for the third consecutive year, reflecting its continued commitment to transparency, good corporate governance, and ethical business conduct.

Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

No

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

No

Group Operating-Structure Policy

Description

Thai O.P.P. Public Company Limited was established in 1983 and was successfully listed on the Stock Exchange of Thailand (SET) in 1994. The Company initially commenced its operations as a manufacturer of Oriented Polypropylene (O.P.P.) film. Through its continued commitment to high-quality standards and product excellence, the Company has progressively expanded its business scope to include a wide range of plastic films and specialized packaging materials, thereby establishing a strong and reputable position within the industry.

To support sustainable growth and increasing production capacity, the Company currently operates three strategically located manufacturing facilities, all of which are equipped with modern machinery and advanced technological processes, as follows:

  • Chan Road Factory: Specialized in adhesive label printing.

  • Ladkrabang Industrial Estate Factory: Focused on plastic film production.

  • Wellgrow Industrial Estate Factory (Chachoengsao): A multi-functional facility supporting plastic film production, laminated tube manufacturing (primarily for toothpaste), and adhesive label printing operations.

International Expansion and Investments

In addition to its domestic operations, the Company has strategically expanded its presence within the ASEAN region through investments in associated companies and joint ventures, as follows:

  • 2001: Entered into a joint venture with L.S. Pack Company Limited to manufacture and distribute laminated tubes in the Socialist Republic of Vietnam.

  • 2020: Partnered with PT. DYNAPACK ASIA to establish PT. KIMPAI DYNA TUBE, a joint venture focused on the production and distribution of laminated tubes in the Republic of Indonesia.

Companies Where the Company Holds ≥10%

Companies (≥10% Holding)

Company NameAddressTelephoneBusiness TypeSecurity TypeSharesPaid-up Shares
L.S. Pack Company LimitedLot A2-2, Tay Bac Cu Chi Industrial Park, Tan An Hoi, Cu Chi, Ho Chi Minh City, Vietnam (84-8) 8924670Manufacture and distribution of laminated tubes Other00
PT. KIMPAI DYNA TUBEJababeka IX-B Road, Wangunharja Village, North Cikarang District, Bekasi Regency, West Java Province 1753002122799030Manufacture and distribution of laminated tubesCommon shares21,87921,879

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

No

Relationships Among Major Shareholders

Relationship Exists (Y/N)

No

Shareholders' Agreement

Agreement Exists (Y/N)

No

Shareholding Diagram (Group Structure)

Does the company hold shares in other companies?

Yes

Associated Companies

Company NameJuristic Persons / Holders
L.S. Pack Company LimitedTHAI O.P.P. PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 25.0

Joint-Venture Companies

Company NameJuristic Persons / Holders
PT. KIMPAI DYNA TUBETHAI O.P.P. PUBLIC COMPANY LIMITED · Shareholding proportion percent: 51.0

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations1,668,8031001,685,4321001,553,341100
Plastic film1,152,54669.061,204,53171.471,072,64469.05
Adhesive Label Printing Service430,39425.79394,95323.43398,29325.64
Toothpaste tube85,8635.1585,9485.182,4045.3
OtherOther000000

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue from operations1,668,8031001,685,4321001,553,341100
DomesticDomestic1,665,27699.791,681,60199.771,548,69499.7
InternationalInternational3,5270.213,8310.234,6470.3

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 36084.0 · Description: Total other income · As of yesteryear: 31476.0 · As of year before yesteryear: 35969.0 · 1711 · As of year: 36084.0 · Description: Other income from operations · As of yesteryear: 31476.0 · As of year before yesteryear: 35969.0 · 24463.0 · Description: Revenue from the sale of film scraps · As of yesteryear: 21657.0 · As of year before yesteryear: 16424.0 · 0.0 · Description: Commission income from being a distributor · As of yesteryear: 310.0 · As of year before yesteryear: 7468.0 · 4898.0 · Description: Interest Income · As of yesteryear: 5485.0 · As of year before yesteryear: 6916.0 · -2681.0 · Description: Foreign exchange gain · As of yesteryear: 3310.0 · As of year before yesteryear: 2030.0 · 2757.0 · Description: Profit from the sale of other financial assets · As of yesteryear: -3115.0 · As of year before yesteryear: 800.0 · 660.0 · Description: Rental Income · As of yesteryear: 660.0 · As of year before yesteryear: 900.0 · 5986.0 · Description: Other Income · As of yesteryear: 3169.0 · As of year before yesteryear: 1431.01712 · As of year: 0.0 · Description: Other income not from operations · As of yesteryear: 0.0 · As of year before yesteryear: 0.01713 · As of year: 24026.0 · Description: Share of profit · As of yesteryear: 12867.0 · As of year before yesteryear: 15993.0

Product / Service Characteristics

Business Type

3114

Business Groups

Business GroupDescription
Plastic film

The company manufactures and distributes plastic film products used in the packaging industry for both consumer products and industrial products, including:

Plastic films that are the company's products

  • Cast Film is a film produced by melting plastic pellets into a liquid and extruding them into thin sheets, used as a component of flexible packaging such as bread bags, snack bags, noodle bags, etc. The type of film produced by the company is Multilayer Film, meaning the film consists of multiple layers of different types of plastic arranged together. Films produced by this method include CPP and LLDPE (CLL) films.

  • Metallized Film is the process of taking plastic film products and spraying them with a thin layer of aluminum vapor in a vacuum chamber, which gives the film a shiny appearance and properties similar to aluminum foil. When used for food packaging, it allows for extended storage and preservation of food.

  • Blown Film is a film produced by melting plastic pellets into a liquid and blowing them into thin sheets. The film is then cooled by air blowing and wound by a winding machine. In the packaging industry, films processed by blowing are used for lamination with other types of films such as Nylon, PET, and OPP to create frozen food bags, stand-up pouches, and vacuum bags.

Plastic films for trading (bought and sold)

  • Stretch Film Used as a wrapping film for products and pallets, widely employed in general industrial factories to protect goods from dust and water during storage in warehouses or during transit. It is also used as a material to secure goods to pallets, helping to prevent items from falling during transportation, serving as an alternative to strapping. Furthermore, it can be directly applied to wrap certain types of products. This type of film includes both imported and domestically produced varieties. Currently, stretch film products are in high demand in industrial factories, with a consistently increasing growth rate.

  • Shrink Film Used for wrapping products, especially for applications where the box or contents need to be visible, due to its transparent and glossy nature. It is used for wrapping products with L-Seal wrapping machines, such as stationery, magazines, semi-finished foods, toys, etc. It is also used for wrapping products with Flat Film machines, such as cup instant noodles and frozen food categories. The company's policy emphasizes customer service to meet customer needs, thus categorizing products into Premium (high-quality products) and general customer groups.

  • Skin Vacuum Film This film is produced from special plastic pellets and is used for the frozen food industry. It is applied with vacuum packaging machines, which allow the film to act as a second skin for the product. This type of film possesses excellent properties for preserving the freshness of food. It can also be used for products packaged in Blister Packs, where the product is attached to a paper backing, replacing the 0.2 polystyrene cover, and packaged by a Skin Pack Machine. This film is exclusively distributed in Thailand by the company for Thai Offset Co., Ltd., which is also the sole manufacturer in the country. The primary customers for this type of film are in the frozen seafood sector, predominantly for frozen foods exported to the American and European markets.

  • Heat sealable OPP Film is a plastic film used for external packaging, widely utilized in both consumer and industrial sectors.

Printing Services on Adhesive Labels/Plastic Film

Product or service characteristics and business innovation development

The company provides printing services for adhesive labels in both roll and sheet forms, plastic films in rolls, IML labels, and various packaging materials for the beauty, cosmetics, food, beverage, pharmaceutical, household, and industrial sectors. Printing can be done on a wide range of raw materials, including all types of paper and film, and utilizes various printing processes to enhance the unique properties of each printing system and produce high-quality and diverse works, such as:

  1. Label printing for application on packaging, or packaging for consumer goods, beverages, food, pharmaceuticals, various equipment and tools, or automobile tires, etc.

  2. Promotional works such as Pop-up Labels, multi-pack stickers, and various information tags.

  3. Peel & Read labels allow multiple pages of information to be accessed, accommodating data in small areas.

  4. Various security works that require special materials to prevent counterfeiting.

The printing characteristics are divided into 3 types as follows:

  1. Hybrid printing systems, including Flexography, Offset, Gravure, Letterpress, and Silk Screen, which can print in a single process, creating beautiful, high-quality, and distinctive works that add value to products and packaging.

  2. Digital printing system, capable of producing beautiful, accurate, and high-quality prints to meet urgent demands that do not require high volumes, or for various promotional marketing campaigns. It can efficiently support both quality and urgent projects.

  3. Gravure system: Gravure printing on plastic film, used for flexible packaging for food products, detergents, or snacks, and shrink sleeves for packaging requiring all-around printing.

With modern innovation and experienced and skilled personnel, including a work development process focused on responding to customer needs, the main marketing strategy is to produce high-quality products, create added value for customers, work closely with customers, and provide information and feedback from the initial stages of development (Put Quality in the Design). Testing and follow-up are conducted to ensure that customers receive high-quality work that meets their expectations, is free from usage problems, and can be utilized efficiently to achieve maximum customer satisfaction.

Laminated tubes for toothpaste

Product or Service Characteristics and Business Innovation Development

Laminated tube products involve the lamination process of LLDPE film and aluminum foil raw materials to bond them together, forming a semi-finished material called WEB (the tube body). The WEB is then cut according to customer specifications for the printing process based on customer-defined designs. The printed WEB then undergoes a forming process using a tube manufacturing machine and is assembled with various shoulder and cap designs according to customer requirements, resulting in finished tubes of various sizes, which are then delivered to customers for product filling.

Due to the relatively high capital investment required in this industry, which involves multiple production stages and necessitates specialized machinery for each process, specifically designed for toothpaste tube manufacturing and not adaptable for use in other industries, this product therefore faces limited competition.

Research & Development

Has R&D Policy (Y/N)

Yes

R&D Cost — Description

The company continuously prioritizes the development and production of packaging films that align with the Circular Economy concept, by focusing on reducing environmental impact throughout the product lifecycle. This is achieved through responsible production process design and material selection. The company offers environmentally friendly alternative products that meet the needs of customers who prioritize sustainability. The key approaches to product development are in 3 main areas:

1. Utilizing raw materials derived from post-consumer waste recycled back into the process (Post Consumer Recycled : PCR)

2. Recycling post-industrial film trim from the production process (Post Industrial Recycled : PIR)

3. Development of plastic film to reduce usage volume (Downgauge) and film that can be efficiently recycled (Mono-material)

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

R&D Cost — This Year

35.49

R&D Cost — Last Year

22.62

R&D Cost — 2 Years Ago

7.43

Assets Used in the Business

Permanent Assets — Description

Core Permanent Assets

The Company’s significant fixed assets primarily comprise land, buildings, machinery, and equipment, which are essential to its production and operational activities. These assets support the Company’s manufacturing capabilities and enable efficient and continuous business operations.

As of December 31, 2025, the book value of the Company’s core permanent assets is summarized as follows:

Permanent Assets — Appraisal

AssetOwnershipObligationAppraisal Value
Land in Lat Krabang Industrial Estate, 1 plot, approximate area 6 rai 14 square wah, with improvements.OwnerNone3,356,981
Machinery and Equipment / Factory Tools and AppliancesOwnerNone392,979,535
Factory Buildings and UtilitiesOwnerNone40,758,669
Decorative items, fixtures, and office equipmentOwnerNone7,370,261
VehicleOwnerNone15,497,222

Intangible Assets — Description

The Company’s intangible assets primarily consist of computer software, which is pending amortization and used to support operational and administrative functions.

As of December 31, 2025, the book value of the Company’s core intangible assets is as follows:

Intangible Assets — Appraisal

AssetTypeAppraisal Value
Intangible AssetsSoftware309,212

Has Subsidiaries Investment Policy (Y/N)

No

Marketing Policy & Competition

Reporting Mode

3116

Per-Business-Group Breakdown

Marketing PolicyIndustry & Competition

In 2025, Thailand's packaging film industry received support from the expansion of domestic industries, particularly the food and beverage sector, retail, and the recovery of consumer goods exports in line with economic conditions. However, the overall market still faces challenges from intensifying competition, resulting from the expansion of production capacity by regional manufacturers and the import of low-cost plastic films, leading to continuous price pressure. Concurrently, stricter trade regulations and environmental policies in the global market have accelerated a tangible transition towards sustainable packaging.

The company continues to focus on developing innovative packaging films, prioritizing value creation over price competition. This is achieved through efficient management in both production and research and development to maintain product standards and quality. The company has consistently received quality system certifications.

In 2025, the company fully utilized its investment in expanding production capacity, focusing on market development in the specialty products film segment to enhance competitiveness and align with global industry trends, as follows:

  • Sustainability : Develops products that help reduce environmental impact, such as films with low sealing temperatures for mono-material structures, which facilitate recycling in line with the circular economy approach.

  • Down-gauging : Develop thinner films that effectively maintain strength and barrier properties, reducing raw material usage and overall customer costs.

  • High Barrier Films : Utilizes the potential of 7-layer film technology machinery to produce films with shelf-life extending properties, using EVOH as a barrier layer under the mono-material concept, which enhances resource efficiency and supports energy reduction in customers' production processes.

Customer characteristics, target customer groups, and distribution channels

The company continues to focus on providing services and developing products for its main customer groups, namely product brand owners and packaging manufacturers, who require diverse films and unique customized solutions. The trust customers place in the company stems from close collaboration in a co-development model, which allows for complete fulfillment of application requirements.

Regarding distribution channels, the company primarily focuses on direct customer service. It leverages a technically proficient sales team, working in conjunction with the research and development team, to provide consultation, recommend suitable products, and respond to customer needs quickly and efficiently.

Proportion of domestic and international sales

Currently, the domestic market remains the company's primary source of revenue, particularly in the consumer goods sector, which experiences continuous demand. Concurrently, the company exports products to regional markets, though not yet in a significant proportion.

The company prioritizes product development that aligns with the needs of customers in each market, focusing on high-quality and environmentally friendly products. It also prepares production processes and product standards to comply with domestic and international packaging regulations and requirements.

Although the overall industry is trending towards growth in line with economic recovery, the competitive situation in 2025 remains high. This is a result of the expansion of petrochemical industry production capacity in several regions, particularly in China, where large-scale projects have been invested in. This leads to an oversupply in the market and an influx of products priced lower than those produced domestically, thereby pressuring the sales price structure and overall profit margins of the industry.

Under these circumstances, the company has been able to maintain its market share and achieve continuous growth by proactively adapting in several areas, as follows:

1. Efficient Cost Management

The company has procured alternative raw material sources to diversify supply risks, coupled with enhancing resource utilization efficiency and production processes, to control costs without compromising product quality.

2. Increasing the Proportion of Value-added Products

The company aims to reduce reliance on general-purpose film products with high price competition by focusing on developing films with specialized properties (Specialty Products). These products help create added value for customers, which is a crucial factor in strengthening long-term competitiveness.

3. Differentiating Service Offerings

The company focuses on enhancing customer service by having a team of technical experts work closely with clients to provide consultation, solve problems, and develop solutions that meet real-world application needs. This helps strengthen long-term relationships and reduce sensitivity to price competition.

Industry Trends and Future Competitive Landscape

It is anticipated that over the next 1–3 years, Thailand's plastic products industry will continue to experience gradual growth, in line with the economic recovery. However, the industry still faces significant challenges, particularly the transition to increasingly stringent environmental regulations both domestically and internationally. This drives operators to urgently adapt and develop products in concrete alignment with sustainability guidelines. Concurrently, competition from imported goods, especially from countries with lower production costs, continues to exert pressure on product prices and profit margins in the regional market.

To address these trends, the company has established a sustainable growth strategy, aiming to become a strategic partner in environmentally friendly packaging. Concurrently, it is accelerating the expansion of revenue proportion from value-added product groups, especially Specialty Films, such as films for packaging that use mono-material structures which are recyclable, including both Polypropylene and Polyethylene films. This also includes films designed to reduce raw material usage and streamline packaging production processes, utilizing 7-layer film production technology, which enhances resource efficiency and supports overall environmental impact reduction.

Furthermore, the company continuously emphasizes enhancing internal operational efficiency through improvements in production processes, resource management, and the application of technology. This aims to strengthen competitiveness and support stable growth amidst industry changes.

In 2025, the adhesive label and sticker printing market is expected to continue expanding, supported by the recovery of economic activities and increasing demand from industries such as consumer goods, food and beverages, health and beauty products. In addition, there is growing demand for packaging that provides differentiation in both visual presentation and information content.

Customers are increasingly prioritizing sustainability in packaging, including the use of recyclable materials, reducing the impact of labels on packaging recyclability, and complying with stricter environmental regulations in both domestic and international markets. These trends require closer collaboration between the Company, customers, and material suppliers to address functional, marketing, and sustainability requirements simultaneously.

Furthermore, there is a rising demand for flexible printing solutions, particularly for short production runs, diverse product SKUs, new product launches, and promotional campaigns requiring variable data. This has led to the increasing importance of digital printing technologies and systems that support rapid design changes.

In addition, labels are increasingly utilized as a communication and marketing tool through the integration of QR codes and smart labeling technologies, enabling product traceability, consumer engagement, and enhanced post-purchase experiences.

In response to these trends, the Company continues to focus on providing close and responsive customer service through a technically proficient sales team, working in collaboration with the research and development team. This enables the Company to provide technical consultation, recommend appropriate materials and printing formats, and co-develop products tailored to the specific needs of each industry segment, covering quality, aesthetics, functionality, and sustainability.

Customer Characteristics, Target Segments, and Distribution Channels

The Company’s primary customer base consists of medium to large enterprises, with a strong focus on Business-to-Business (B2B) operations. The Company works directly with customers’ procurement and product development teams across various industries, including Fast-Moving Consumer Goods (FMCG), cosmetics, personal care products, pharmaceuticals, and industrial products.

The Company continues to expand its customer base and diversify across industry segments to capture growing demand for specialized packaging solutions that integrate quality, aesthetics, functionality, and sustainability.

In terms of distribution channels, the Company primarily operates through direct sales, supported by a technically capable sales team working closely with the research and development team. This integrated approach enables efficient customer engagement, tailored solution development, and rapid response to customer requirements.

The Industry Competition during the Preceding Year

In 2025, the Company’s adhesive label printing volume demonstrated stable growth compared to the previous year, in line with the recovery of domestic consumption and the expansion of export activities. The overall Thai economy continued to grow, supported by the recovery of the tourism sector and improved economic activities.

However, the adhesive label industry remained highly competitive, with numerous market participants ranging from premium to standard-grade product segments. This has intensified price competition, as customers increasingly emphasize cost efficiency to maintain their competitiveness, resulting in continued pressure on pricing across the market.

To address these challenges, the Company has implemented several initiatives to enhance operational efficiency:

  • Machinery and Production Technology Development
    Continuous investment in machinery upgrades and maintenance to improve production accuracy, reduce waste, and enhance lead time efficiency.

  • Human Capital Development
    Ongoing employee training and skill development, along with strengthened internal communication, to ensure operational accuracy and reduce process-related errors.

  • Effective Cost Management
    Optimization of resource utilization and operational processes. In 2025, the Company fully benefited from its solar power generation system, which has been in operation since 2022, contributing significantly to energy cost reduction.

Industry Outlook and Competitive Landscape

Over the next 1–3 years, the adhesive label and sticker industry is expected to continue its growth trajectory, driven by expansion in consumption and related industries, particularly in consumer goods, food and beverages, and health and beauty products.

Nevertheless, the Company anticipates ongoing challenges from intensifying competition, both from domestic manufacturers and international players, particularly from Chinese manufacturers with strong production capabilities and cost efficiency. This is expected to sustain downward pressure on market prices.

At the same time, customer behavior is evolving, with labels increasingly serving as tools for product differentiation and consumer communication. Demand for flexibility, including small-lot production, product variety, and shorter lead times, is also increasing. These trends require continuous adaptation in technology and operational processes.

In addition, sustainability considerations remain a critical factor, with increasingly stringent environmental regulations across markets.

In response, the Company focuses on strengthening competitiveness through value-added product development, operational efficiency enhancement, and close technical collaboration with customers. The Company also continues to develop sustainable packaging solutions to support stable and long-term growth.

Laminated tube products are manufactured through a process that combines LLDPE film sheets and aluminum foil to produce a semi-finished material known as “WEB,” which forms the tube body. The WEB is then cut to customer-specified dimensions and printed according to customer designs. Subsequently, the material is formed into tubes using specialized tube-forming machines and assembled with various shoulder and cap configurations, resulting in finished products ready for customer filling.

Domestic and International Sales Proportion

In 2025, sales of laminated tube products were entirely derived from the domestic market, accounting for 100% of total sales.

In 2025, although overall economic conditions showed gradual recovery, the laminated tube industry continued to face intense competition from both domestic manufacturers and foreign operators establishing production bases in Thailand. As a result, the Company has adjusted its strategies in several areas, including pricing, production efficiency, technology adoption, and service quality enhancement, to strengthen customer confidence and expand its customer base.

Despite the challenging environment, the laminated tube business maintained revenue at a level comparable to the previous year. The Company continues to focus on improving production processes and maintaining strict quality control to sustain competitiveness and long-term customer relationships.

Industry Trends and Future Competitive Landscape

Competition in the laminated tube market is expected to remain high, particularly in standard product segments where price competition is prevalent. At the same time, customers increasingly prioritize product quality, consistency, and the ability to develop customized solutions tailored to specific requirements.

Sustainability considerations are also becoming increasingly important, with growing demand for packaging that reduces material usage and supports recyclability.

In response, the Company continues to focus on improving product quality, enhancing production efficiency, and strengthening technical services to customers, thereby maintaining competitiveness and supporting long-term business relationships.

Procurement of Products & Services

Reporting Mode

3116

Per-Business-Group Breakdown

ProcurementRaw Material AcquisitionProduction PolicyDistributorsNo. of DistributorsProduction CapacityPurchase Proportion

List of Plastic Film Manufacturing Plants

  1. Lat Krabang Branch Factory

    • Location:No. 119, Moo 4, Lat Krabang Industrial Estate, Chalong Krung Road, Lam Pla Thio Subdistrict, Lat Krabang District, Bangkok 10520

    • Main Products:Plastic Film Product Group

    • Telephone:0-2326-0929-30

  2. Bang Pakong Branch Factory (Unit 1)

    • Location:No. 91/3, Moo 5, Wellgrow Industrial Estate, Soi 6, Bangna-Trad Road, Bang Samak Subdistrict, Bang Pakong District, Chachoengsao Province 24180

    • Main Products:Metallized Film

    • Telephone:038-571-676-9

  3. Bang Pakong Branch Factory (Unit 2)

    • Location:No. 91/9, Moo 5, Wellgrow Industrial Estate, Soi 6, Bangna-Trad Road, Bang Samak Subdistrict, Bang Pakong District, Chachoengsao Province 24180

    • Main Products:Plastic Film Product Group

    • Telephone:038-571-676-9

  4. Bang Pakong Branch Factory (Unit 3)

    • Location:No. 91/2, Moo 5, Wellgrow Industrial Estate, Soi 6, Bangna-Trad Road, Bang Samak Subdistrict, Bang Pakong District, Chachoengsao Province 24180

    • Main Products:Plastic Film Product Group

    • Telephone:038-571-676-9

In 2025, the Company sourced approximately 68.1% of its total plastic pellets from domestic suppliers and 31.9% from international sources. This sourcing structure reflects the Company’s strategic adjustment to align with global market conditions, raw material pricing, and overall cost competitiveness. The Company has also enhanced sourcing flexibility by procuring certain raw materials from overseas suppliers, thereby supporting cost optimization while maintaining consistent product quality.

The Company adopts a policy of diversifying its sourcing channels and does not rely significantly on any single supplier. In addition, the Company does not enter into long-term exclusive procurement agreements, thereby preserving flexibility in cost management and supplier negotiation. Raw material suppliers are continuously evaluated based on key criteria, including product quality, delivery capability, pricing competitiveness, and sustainability practices, to ensure compliance with the Company’s required standards.

To enhance supply chain efficiency, the Company has implemented a data-driven procurement system that integrates information across production, procurement, and planning functions. This system improves the accuracy of raw material demand forecasting and supports informed decision-making. Furthermore, the Company maintains appropriate inventory levels to accommodate fluctuations in supply and demand, while mitigating the risk of raw material shortages.

Materials Used as Substitutes for Raw Materials

The Company places strong emphasis on research and development of alternative raw materials to respond to evolving packaging trends and increasingly stringent environmental regulations. In particular, the Company focuses on the development of mono-material structures, which are easier to recycle and aligned with circular economy principles.

In addition, the Company continuously refines product formulations to meet diverse customer requirements, including recyclability, material reduction (downgauging), and the minimization of environmental impact, thereby supporting sustainable product development.

21Film Production (tons) · Unit: Ton · Spent: 75.97 · Total: 20832.0 · Unit code: 2950 · Metallized film · Unit: Ton · Spent: 16.27 · Total: 2160.0 · Unit code: 2950394060594.5 · Country code: 211 · Country name: Thailand · Raw material name: Plastic pellets · 184114411.06 · Country code: 3351 · Country name: Asia · Raw material name: Plastic pellets · 538154.64 · Country code: 3353 · Country name: North America · Raw material name: Plastic pellets

List of Adhesive Label and Roll Film Manufacturing Plants

  1. Chan Road Branch Factory

    • Location:No. 2234/3 Chan Road, Chong Nonsi Sub-district, Yannawa District, Bangkok 10120

    • Main Products:Printing of adhesive labels and roll plastic film

    • Telephone:0-2678-1051-5, 0-2285-4940

  2. Bang Pakong Branch Factory (Unit 4)

    • Location:No. 91/5 Moo 5, Wellgrow Industrial Estate, Soi 6, Bangna-Trad Road, Bang Samak Sub-district, Bang Pakong District, Chachoengsao Province 24180

    • Main Products:Printing of adhesive labels and roll plastic film

    • Telephone:038-571-676-9, 086-341-5812

Raw Material Supply Risks

Despite the high proportion of domestic procurement, the Company actively manages supply risks by maintaining a diversified supplier base to avoid over-reliance on any single source.

In addition, the Company continuously identifies and develops alternative suppliers, using key criteria such as quality, cost competitiveness, service level, and delivery capability. This approach ensures that raw materials are consistently available, meet quality requirements, and effectively support customer demand.

The primary raw materials used in the Company’s adhesive label printing operations include label stock, printing inks, and coating materials. The Company places strong emphasis on efficient supply chain management to ensure continuity of production, while effectively managing costs and mitigating risks arising from market fluctuations.

The Company applies a systematic approach to supplier selection and evaluation, covering both domestic and international sources. Key evaluation criteria include product quality, reliability, delivery capability, and price competitiveness, ensuring that all procured raw materials consistently meet the Company’s required standards.

Procurement Strategy and Policy

In 2025, the Company sourced approximately 99.99% of its raw materials from domestic suppliers. This reflects the strong capability of local suppliers in maintaining consistent product quality, while offering competitive pricing within high-standard markets.

Domestic procurement also enables the Company to mitigate risks associated with foreign exchange fluctuations and international logistics, while enhancing flexibility in inventory management. Advantages include shorter lead times, faster delivery, and the ability to order in appropriate quantities. As a result, the Company is able to reduce inventory holding requirements, improve cash flow efficiency, and respond promptly to changing market conditions.

Nevertheless, the Company continues to evaluate both domestic and international suppliers on an ongoing basis. Supplier selection is based on quality standards, reliability, and delivery performance, with particular focus on key manufacturers and distributors to ensure consistent raw material quality and supply stability.

27Adhesive Label Printing Factory · Unit: Others · Spent: 41.55 · Total: 16884.0 · Unit code: 2961 · Unit other name: Square meter227629785.98 · Country code: 211 · Country name: Thailand · Raw material name: Adhesive labels and printing ink · 13467.44 · Country code: 3351 · Country name: Asia · Raw material name: Adhesive labels and printing ink

Laminated Tube Manufacturing Plant

  • Location:No. 85/2, Moo 1, Wellgrow Industrial Estate, Soi 2, Homsin Subdistrict, Bang Pakong District, Chachoengsao Province 24180

  • Main Products:Laminated tubes

The Company sources 100% of its raw materials for laminated tube production from domestic suppliers. The primary raw material is laminated web, which has undergone prior lamination processes and is subsequently formed into tubes based on customer-specified diameters and designs.

The Company utilizes advanced machinery capable of producing both ABL (Aluminium Barrier Laminated Tubes) and PBL (Plastic Barrier Laminated Tubes), each offering distinct sealing and barrier performance characteristics. The production system is designed to allow flexible machine adjustments to accommodate different product specifications, ensuring consistent product quality and manufacturing efficiency.

-

1Laminate Tube Manufacturing Plant · Unit: Others · Spent: 30.94 · Total: 125200000.0 · Unit code: 2961 · Unit other name: Tube58259061.0 · Country code: 211 · Country name: Thailand · Raw material name: Laminate tube

Projects Under Construction

Has Projects Under Construction (Y/N)

No

Debentures & Bills of Exchange

Has Debentures (Y/N)

No

Convertible Securities

Has Convertible Securities (Y/N)

No

Contents